长沙理工大学首页|云就业平台|后台管理|
院务公开|

智能电网与电子工程系

□ 当前位置: 学院首页 -> 师资队伍 -> 教师名录 -> 正文

彭昱

发布日期:2021年11月24日 来源: 作者:

彭昱,女,汉族,中共党员,1993年3月出生于湖南省湘潭市,博士,讲师,硕士生导师。

2015年6月毕业于沈阳工业大学风能与动力工程专业,获学士学位,同年保研至湖南大学直博,2021年10月毕业于湖南大学,获电气工程博士学位。目前在长沙理工大学电气与信息工程学院智能电网与电子工程系从事教学和科研工作。

主讲课程

主要研究方向:(1)电磁无损检测与评估 (2)红外机器视觉 (3)新能源健康管理

作为主要研究人员参与完成多项国家重点研发计划、国家自然科学基金及青年基金项目;在《IEEE Transactions on Industrial Informatics》、《IEEE Sensors Journal》等国内外重要刊物上发表论文十余篇,其中SCI收录4篇,EI收录5篇。

    主要成果及代表作:

[1] Yu Peng, Shoudao Huang, Baoyuan Deng, Yunze He, Xin Guo, Hongjin Wang, Jian Han. Joint Scanning Electromagnetic Thermography for Industrial Motor Winding Defect Inspection and Quantitative Evaluation [J]. IEEE Transactions on Industrial Informatics, vol. 17, no. 10, pp. 6832-6841, 2021.

[2] Yu Peng, Shoudao Huang, Yunze He, Xin Guo. Eddy current pulsed thermography for noncontact nondestructive inspection of motor winding defects [J]. IEEE Sensors Journal,vol. 20, no. 5, pp. 2625-2634, 2020.

[3] 彭昱, 黄守道, 何赟泽,郭昕,罗德荣,张晓飞. 电机绕组缺陷的电-磁-热多物理场仿真与定量检测方法[J]. 电机与控制学报, 2021, 25(01): 79-89.

[4] Shoudao Huang, Yu Peng, Xin Guo. Dynamic Inspection Method of Motor Winding Defects Based on Scanning Inductive Thermography and Image Registration[C], 2021 IEEE 4th International Electrical and Energy Conference (CIEEC),2021. 

[5]  Xin Guo, Shoudao Huang, Yu Peng. Robust Speed Sliding Mode Control for PMSM Based on A Novel Reaching Law and High-Order Fast Terminal Sliding-Mode Observer[C], 2020 12th IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), Nanjing, China, 2020, pp. 1-6.

 

Email:hnu_cspy@hnu.edu.cn

通讯地址:(邮政编码410004)长沙市天心区万家丽南路二段960号长沙理工大学云塘校区电气与信息工程学院


上一篇:曹一家 下一篇:喻锟