发表论著
2015年05月21日
序号 |
论文(著作)名称 |
发表时间 |
发表刊物或会议名称及性质 |
主要完成者(前三名) |
1 |
Topological optimization design of structures under random excitations using SQP method |
2013 |
Engineering Structures |
荣见华 |
2 |
Topology optimization of finite similar periodic continuum structures based on a density exponent interpolation model |
2013 |
Computer Modeling in Engineering & Sciences |
荣见华 |
3 |
Comparing optimal material microstructures with optimal periodic structures |
2013 |
Computational Materials Science |
荣见华 |
4 |
Multi-scale design of composite materials and structures for maximum natural frequencies |
2013 |
Materials and Design |
荣见华 |
5 |
基于位移约束的类周期性连续体结构拓扑优化设计 |
2013 |
应用力学学报 |
荣见华 |
6 |
新型柔性护栏碰撞安全性仿真分析及实车验证 |
2013 |
振动与冲击 |
雷正保 |
7 |
Observer-based H∞ control for vehicle handling and stability subject to parameter uncertainties |
2013 |
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering |
张志勇 |
8 |
H∞ Output Feedback Semi-active Control of Vehicle Seat Suspension with Parameters Uncertainty |
2013 |
Journal of Vibration and Shock |
张志勇 |
9 |
OBSERVE-BASED DIRECT YAW-MOMENT H∞ CONTROL FOR IN-WHEEL-MOTORED ELECTRIC VEHICLE |
2013 |
Journal of Theoretical and Applied Information Technology |
张志勇 |
10 |
Interval multi-objective optimisation of structures using adaptive Kriging approximations |
2013 |
Computers and Structures(计算与结构) |
李方义 |
11 |
An uncertain multidisciplinary design optimization method using interval convex models |
2013 |
Engineering Optimization(工程优化) |
李方义 |
12 |
A non-probabilistic reliability-based optimization of structures using convex models |
2013 |
CMES-Computer Modeling in Engineering & Science(工程与科学计算建模) |
李方义 |
13 |
薄板振动式液压脉动衰减器滤波特性研究 |
2013 |
机械工程学报 |
贺尚红 |
14 |
铁路路堤周围测风站选址研究 |
2013 |
中南大学学报(自然科学) |
苗秀娟 |
15 |
A multivariate CBM model with a random and time-dependent |
2013 |
Reliability Engineering and System Safety |
蒋仁言 |
16 |
A new bathtub curve model with afinite support |
2013 |
Reliability Engineering and System Safety |
蒋仁言 |
17 |
A tradeoff BX life and its applications |
2013 |
Reliability Engineering and System Safety |
蒋仁言 |
18 |
Two Methods to Estimate the Change Points of a Bathtub |
2013 |
International Journal of Performability Engineering |
蒋仁言 |
19 |
A modified MPS method for fitting the 3-parameter Weibull distribution |
2013 |
Quality, Reliability, Risk, Maintenance, and Safety Engineering,2013 |
蒋仁言 |
20 |
Log-Weibull distribution as a lifetime distribution |
2013 |
Quality, Reliability, Risk, Maintenance, and Safety Engineering,2013 |
蒋仁言 |
21 |
新型振动能量助力式汽车液压转向系统研究 |
2013 |
机床与液压 |
雷正保 |
22 |
新型振动能量回收式液压减振系统研究 |
2013 |
机床与液压 |
雷正保 |
23 |
薄板振动式广谱流体脉动衰减器实验研究 |
2013 |
液压与气动 |
贺尚红 |
24 |
Effect of fiber surface treatments on the properties lacquer seed shell fiber-reinforced poly(lactic acid) composites |
2013 |
Journal of Reinforced Plastics and composites(增强塑料及复合材料杂志) |
龙春光 |
25 |
微弱裂纹信号的稀疏编码提取 |
2013 |
振动工程学报 |
王向红 |
26 |
CRACK LOCALIZATION IN HYDRAULIC TURBINE BLADES BASED ON KERNEL INDEPENDENT COMPONENT ANALYSIS AND WAVELET NEURAL NETWORK |
2013 |
International Journal of Computational Intelligence Systems |
王向红 |
27 |
Dynamics Simulation and Optimization of Ride Comfort for Car on Random Road |
2013 |
Journal of Applied Sciences(应用科学学报) |
胡林 |
28 |
Optimization of astronaut landing position based on micro multi-objective genetic algorithms |
2013 |
Aerospace Science and Technology |
刘鑫 |
29 |
The uncertain optimization of buffering characteristics of landing airbag in manned airdrop |
2013 |
International Journal of Crashworthiness |
刘鑫 |
30 |
Relationship between delay time and gamma process models |
2013 |
Chemical Engineering Transactions |
蒋仁言 |
31 |
MgH2-Al2O3球磨储氢复合体系的组织结构及解氢性能 |
2013 |
材料导报 |
张健 |
32 |
车辆动力学稳定性协同控制CAN网络系统硬件设计 |
2013 |
长沙理工大学学报 |
张新 |
33 |
氟化铵-盐酸法提纯隐晶质石墨工艺研究 |
2013 |
材料导报 |
谢炜 |
34 |
氢氧化钙处理隐晶质石墨纯化后的酸性含氟废水研究 |
2013 |
非金属矿 |
谢炜 |
35 |
隐品质石墨/LDPE复合材料的吸波性能 |
2013 |
材料导报 |
谢炜 |
36 |
剪叉式机动平台承载能力有限元分析与优化设计 |
2013 |
东华大学学报. 自然科学版 |
郭克希 |
37 |
“悬架座椅激励输入谱的时域信号重构研究” |
2013 |
机械科学与技术 |
张志勇 |
38 |
Al-0.30%Sc-Zn-Cu四元系富铝角450 ℃等温截面的相关系 |
2013 |
中国稀土学报 |
戴晓元 |
39 |
不同淬火冷却介质对高锌7系铝合金组织性能的影响 |
2013 |
矿冶工程 |
戴晓元 |
40 |
铜铝复合板导电特性的研究 |
2013 |
材料导报 |
罗奕兵 |
41 |
“Input variables extraction for Grouting Pressure Dynamics Model ” |
2013 |
Disaster Advances(灾难前沿) |
李凤玲 |
42 |
Flexible boom numerical simulation and vibration |
2013 |
International Journal of Computer Science Issues(世界计算机科学) |
唐宏宾 |
43 |
Finite element modeling and strength analysis of boom system of concrete pump truck |
2013 |
Applied Mechanics and Materials(应用力学和材料) |
唐宏宾 |
44 |
Strain effect on structural and dehydrogenation properties of MgH2 hydride from first-principles calculations |
2013 |
International Journal of Hydrogen Energy |
张健 |
45 |
MgH2 的表面稳定性及其解氢热力学的第一性原理研究 |
2013 |
中国有色金属学报 |
张健 |
46 |
MgH2 脱氢动力学的表面缺陷效应研究 |
2013 |
人工晶体学报 |
张健 |
47 |
Analysis of heat transfer coefficient on workpiece surface during minimum quantity lubricant grinding |
2013 |
International Journal of Advanced Manufacturing Technology |
毛聪 |
48 |
Repairing system of Large-scale Spindle based on Planetary Grinding Equipment |
2013 |
Journal of Mechanical Engineering Science |
毛聪 |
49 |
Investigation on the effect of nanofluid parameters on MQL grinding |
2013 |
Materials and Manufacturing Processes |
毛聪 |
50 |
中国新能源汽车产业的技术路径选择研究 |
2013 |
公路与汽运 |
曾志伟 |
51 |
关于中国新能源汽车产业政策体系的分析及探讨 |
2013 |
公路与汽运 |
曾志伟 |
52 |
四轮轮式驱动电动汽车电气系统设计与实现 |
2013 |
长沙理工大学学报(自然科学) |
杜荣华 |
53 |
交互式电动汽车设计 |
2013 |
公路与汽运 |
杜荣华 |
54 |
New Aluminum Foam/Polyformaldehyde Interpenetrating Phase Composites Prepared by Injection Molding |
2013 |
Advanced Materials Research(会议论文) |
龙春光 |
55 |
关于中国新能源汽车产业政策体系的分析及探讨 |
2013 |
公路与汽运 |
曾志伟 |
56 |
An Overall Performance Measure for Vehicle Retirement Decision |
2013 |
Chemical Engineering Transactions |
蒋仁言 |
57 |
Equal-Risk Acceptance Sampling Plan |
2013 |
Applied Mechanics and Materials |
蒋仁言 |
58 |
Failure patterns of repairable systems and a flexible intensity |
2013 |
International Journal of Reliability and Applications(国际可靠性应用杂志) |
蒋仁言 |
59 |
Life restoration degree following |
2013 |
Journal of Quality in Maintenance Engineering |
蒋仁言 |
60 |
Modified MPS method for fitting the distribution with an unknown upper bound |
2013 |
The 8th International conference on Mathematical Methods in Reliability 2013 |
蒋仁言 |
61 |
状态维修的三个发展阶段 |
2013 |
2013年全国机械行业可靠性技术学术交流会论文集 |
蒋仁言 |
62 |
对由预防维修活动所产生的截尾数据的初步分析 |
2013 |
中国运筹学会可靠性分会第九届可靠性学术会议论文集 |
蒋仁言 |
63 |
基于关键零部件的平衡的BX寿命的车辆保养周期优化 |
2013 |
中国运筹学会可靠性分会第九届可靠性学术会议论文集 |
蒋仁言 |
64 |
起重机二次起升下滑方案研究及仿真分析 |
2013 |
公路与汽运 |
雷兆虹 |
65 |
Special Issue on Network Integration Technology |
2013 |
Telecommun System |
候志祥 |
66 |
养护用沥青拌合设备能耗分析及对比试验研究 |
2013 |
2012全国公路筑机科技创新论坛论文集 |
李自光 |
67 |
沥青拌合站节能减排评价指标体系研究 |
2013 |
公路与汽运 |
李自光 |
68 |
煤转气沥青混合料搅拌设备连续上料技术研究及新型上料机构设计 |
2013 |
公路与汽运 |
李自光 |
69 |
沥青砼拌合设备的煤转气改造 |
2013 |
公路与汽运 |
李自光 |
70 |
影响沥青拌和机旋风除尘器除尘效率的因素 |
2013 |
中国重型装备 |
李自光 |
71 |
基于压差法的起升平衡回路动态特性研究 |
2013 |
液压与气动 |
李自光 |
72 |
一种煤转气沥青拌和设备双齿轮模式上煤装置 |
2013 |
公路与汽运 |
李自光 |
73 |
新型旧沥青混凝土干燥加热装置设计 |
2013 |
筑路机械与施工机械化 |
李自光 |
74 |
沥青拌和站三种燃料应用的比较研究 |
2013 |
公路与汽运 |
李自光 |
75 |
HBTS60砼泵S管动力学分析及优化 |
2013 |
公路与汽运 |
李自光 |
76 |
路面抛丸机分离系统气固二相流数值模拟 |
2013 |
公路与汽运 |
李自光 |
77 |
煤转气再生沥青混合料拌和设备的安装与调试 |
2013 |
公路与汽运 |
李自光 |
78 |
Bipolar iridium dendrimers containing carbazolyl dendron and 1,2,4-triazole unit for solution-processed saturated red electrophosphorescence |
2013 |
Dyes and Pigments(荷兰) |
梁波 |
79 |
POSS-聚合物在锂离子电池中的应用 |
2013 |
中国有色金属学报 |
梁波 |
80 |
基于CCD的多浊度快速检测技术 |
2013 |
仪表技术与传感器 |
李旭宇 |
81 |
一种变删除率的渐进结构优化方法 |
2013 |
长沙理工大学学报(自然科学版) |
李旭宇 |
82 |
A topology optimization method for multiple load cases and constraints based on element independent nodal density |
2013 |
Structural Engineering and Mechanics,结构工程与机械 |
易继军 |
83 |
Topology optimization for continua considering global displacement constraint |
2013 |
Strojniški vestnik - Journal of Mechanical Engineering.机械工程 |
易继军 |
84 |
单孔孔板水力空化器结构参数的数值分析 |
2013 |
轻工机械 |
谢炜 |
85 |
混合酸纯化对隐晶质石墨固定碳含量的影响 |
2013 |
炭素技术 |
谢炜 |
86 |
碱洗条件对隐晶质石墨固定碳含量影响的初步研究 |
2013 |
化学工程师 |
龙春光 |
87 |
中型货车追尾碰撞试验研究 |
2013 |
2013中国汽车工程学会第十六届汽车安全技术学术会议论文集 |
雷正保 |
88 |
中型货车追尾安全性分析与试验验证 |
2013 |
2013中国汽车工程学会第十六届汽车安全技术学术会议论文集 |
雷正保 |
89 |
Mechanical and Tribological propertyes of Polytetrafluoroethylene filled Polyformaldehyde/ Aluminum Foam/ Interpenetrating phase composites |
2013 |
Research in Materials and Manufacturing Technologies(会议论文) |
龙春光 |
90 |
Load Capacity Finite Element and Optional Design of Scissor Platform |
2013 |
Mechanical Science and Engineering ,2013第三届机械科学与工程国际学术会议 |
郭克希 |
|
A Bi-criteria Dimension Reduction Approach with Application in Supplier Selection |
2013 |
The 20th International Conference on Industrial Engineering and Engineering Management |
蒋仁言 |